Products Store - Alfa Solusi

*Images and voices captured by the BB-HCE481, BB-HCM381, BB-HCM 371, BB-HCM 331 or BB-HCM 311 camera can be recorded while two-way voice communication is carried out between the BB-HCE481, BB-HCM381, BB-HCM 371, BB-HCM 331 or BB-HCM 311 camera and the PC. When images with voices are recorded, the frame rate may decrease in some cases.

Motion Detection Recording and Timer-recording Functions*

The program is equipped with a motion detection recording function that activates recording only when people or other moving objects are detected, and a timer-recording function that starts and stops recording at specified times.

* The detection sensitivity level of the motion detection recording function varies depending on the camera resolution, image quality setting, subject condition, network conditions and other factors.

Recorded Image Searches

Recorded images can be searched using conditions such as a preset keyword or recording type (timer recording, motion detection recording).

Recording Capacity Limit

The maximum amount of data to be recorded on the hard disk of the PC can be set for each camera. When the set maximum amount is reached, previously recorded data is overwritten by new data, thus allowing the hard disk space to be used more effectively.

Automatic Backup*1

Recorded images can be saved in another memory location at a preset time.

*1-1 Another PC or drive device on the network cannot be specified as the destination location. This function is not equipped with automatic overwriting.
*1-2 If the free space on the hard disk runs short, the system may become unstable. Be sure to allow sufficient free space (100 MB or more).

Specifications

Camera registration monitoring
No. of registerable camera units	No limitation. Note that the actual number of registerable camera units varies depends on the performance of the PC used.
Camera image view	Images captured by registered cameras are shown in small images on a single screen.
Image display size	6 sizes from 320 x 240 to 60 x 45
Camera setup	Each camera can be set up individually (camera name,resolution, image quality setting, recording format, timer setting, etc.)
Selected camera image display	The image of the selected camera can be enlarged (640 x 240, 320 x 240)
Image zoom in/out	Increase/decrease of image size in 25% steps (25% to 700%), image display size adjusted according to window size
Camera control	Control of basic camera functions (pan/tilt/zoom, brightness, resolution, image quality, sound level).
Preset	Preset functions set in cameras can be used
Recording
Recording file format	Original file format: Images and voices are recorded continuously in a moving image file.
Recording media	Hard disk
Recording resolution	640 x 480, 320 x 240, 160 x 120
Image quality	3 modes (favor clarity, standard, favor motion)
Recording interval	Not specified (based on camera's image update interval), specified: 2 images/second to 1 image/hour
No. of camera units for simultaneous recording	Dependent on camera type and performance of PC. See the hardware specifications below.
Recording capacity limit function	Maximum recording capacity value can be set for individual camera units (whether to save new data by overwriting or stop recording when the set capacity is reached can be selected).
Motion detection recording	The unit can be set to activate recording when motion is detected (sensitivity and threshold value can be adjusted) or to record for a certain time length before and after motion detection.
Timer recording	Programming of start and stop schedules based on day of week and time. Key word can also be set for recording. (10 schedules can be registered per camera).
Disk capacity limit function	Monitors the free space on the specified recording disk, and stops recording when the free space becomes smaller than the set value.
Image operation
Continuous play back	Playback of images with voices, playback of image files. Playback speed can be varied.
Recorded image view	Displays recorded image files in a list format.
Operation of recorded images	Recorded images can be copied or deleted.
Automatic backup of recorded images	Automatically copies recorded images in a specified folder at a set time.
Format conversion	Converts all or part of recorded images to JPEG format file.
Image search
Recorded image search function	Search using recording time or key word set before recording.

Item		Description
Operating system		Microsoft® Windows®XP Professional Edition, Windows® 2000 (Service Pack2 or later)
Web browser		Internet Explorer 6.0 or later
File system		NTFS (NT File System) recommended
Hardware specifications	Recording condition	· When 10 network camera units are connected CPU: Intel® Pentium® 4 3GHz or greater, or equivalent compatible processor, RAM: 512 MB or more · When 4 network camera units are connected CPU: Intel® Pentium® 4 1.8GHz or greater, or equivalent compatible processor, RAM: 256 MB or more
Hardware specifications	Voice	Audio output function (including speaker or headphone)

Sumber data: www.panasonic.co.jp